J9983A New HPE OfficeConnect 1820-24G-PoE+ (185W) Switch

HPE OfficeConnect 1820-24G-PoE+ (185W) Switch

• 12 RJ-45 autosensing 10/100/1000 PoE+ ports
• 12 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)
• 1U - Height

Specifications:

I/O ports and slots
12 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
12 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u Type 100BASE-FX)
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP 100/1000 slots
Memory and processor ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16 MB flash
100 Mb Latency < 7 µs (LIFO 64-byte packets)
1000 Mb Latency < 2 µs (LIFO 64-byte packets)
Throughput up to 38.6 Mpps (64-byte packets)
Switching capacity 52 Gbps
MAC address table size 8000 entries
Frequency 50/60 Hz
Voltage 100 - 127 / 200 - 240 VAC, rated (depending on power supply chosen)
Current 2.6/1.3 A
Maximum power rating 240 W
Idle power 28.3 W
PoE power 185 W PoE+

Returns Policy

New and unopened items may be returned within 30 days of delivery, with limited exceptions. 14 days for unused, still factory sealed equipment. With a 30% restocking fee.

Please check to ensure all returns must be accompanied with the issued return merchandise authorization number to be accepted. We reserved the right not to accept any returns if they are found to be without any return merchandise authorization number.

All RMA item(s) is subjected to either replacement or repair and is solely under the discreet of Semnet Pte Ltd.

Always check for the return address with your respective sales representative.

The return of a purchased product is an exception in business transactions. Customers purchase product with the intent of placing it in service for their customer in some form, either by itself or in a finished product. The product sold is assumed to be in new condition (unless otherwise identified), fully conforming to manufacturers specifications. The RMA system addresses purchased products that do not meet the manufacturer specifications, or are not in the sold condition (new or refurbished).

General Terms

Acceptable returns are those that meet the following criteria :

 - New (unless otherwise identified) condition - Manufacturer sealed, good physical packing.
  - Conforms to manufacturer"s specifications.

Customer responsibility

  - Know the technical specifications of what you are buying.
 - Understand how the part is used in the application for which the part is purchased.
  - Refurbished product is purchased on purpose.

RMA Process

Customer must complete the Request RMA form online when they login to the account

» Customer completely describes the problem, including photos if necessary.

» Email feedback includes the RMA number.

» RMA administrator follows up for clarification during investigation process.

Return Freight Charges

» No charge for shipping to locations where the fault rests with VARDEALS.COM

» The customer pays for shipping when returning product.

» The warehouse pays for shipping when the RMA is valid.

» The customer is responsible for filling claims with freight carriers for related RMA causes.


RMA Number Expiration

RMA numbers are valid for 15 days from the date of issuance (unless otherwise stated at time of issue).

Please download RMA form